R&S®ESPI 测试接收机

提示：点击图片可以放大

R&S^®ESPI 测试接收机专门为满足产品开发和 EMC 预认证过程中所有的 EMC 测试需求而设计，频率范围 9 kHz ～ 3/7 GHz，当配备 R&S^®ESPI-B2 预选器/前置放大器时，所有 R&S^®ESPI型号都具有出色的动态范围，因而能根据 CISPR 16-1-1 对脉冲重复频率 ≥ 10 Hz 的信号执行干扰测量。它们还可以使用 R&S^®ESPI-K50 选件测量通讯或广播网络的场强覆盖，而且测量精度非常高。

主要特点

• 预认证 EMI 测试接收机和高品质频谱分析仪合二为一

• 集成预选功能，可选择 20dB 前置放大器（R&S^®ESPI-B2 选件）

• 满足新版CISPR 16-1-1的加权检波器，包括 CISPR-Average 和 RMS-Average

• 场强特性评估的测量速率非常快（R&S^®ESPI-K50 选件）

• 可利用自动和交互测试程序快速、可靠地进行测量

• 预定义修正因子

• 提供民用标准的限值库

• 另有带宽在 5.6 MHz 和 8 MHz 之间、符合 DVB-T/T2 地面 DVB 网络标准（R&S^®ESPI-K50 选件）的各种信道滤波器。

型号

名称	订货号
R&S^®ESPI3 测试接收机 9KHz到3GHz	1164.6407.03
R&S^®ESPI7 测试接收机 9KHz到7GHz	1164.6407.07

Key Facts

Combination of precertification EMI test receiver and high-quality spectrum analyzer
Integrated preselection with selectable 20 dB preamplifier (R&S®ESPI-B2 option)
Weighting detectors in line with the latest version of CISPR 16-1-1 incl. CISPR-Average and RMS-Average
Evaluation of field strength profiles at very high measurement rates (R&S®ESPI-K50 option)
Fast and reliable measurements using automatic and interactive test routines
Predefined transducer factors
Library of limit lines for commercial standards
Additional channel filters with various bandwidths between 5.6 MHz and 8 MHz matching terrestrial DVB networks like DVB-T/T2 (R&S®ESPI-K50 option)

Features & Benefits

Standard-compliant disturbance measurements for PRFs ≥ 10 Hz
- Total measurement uncertainty 1.5 dB (≤ 3 GHz) in receiver mode
- 1 dB compression 0 dBm nominal
- Displayed average noise level with preamplifier typ. –155 dBm (1 Hz), f < 1 GHz
- Eleven preselection filters up to 3 GHz (R&S®ESPI-B2 option)
- 20 dB preamplifier (R&S®ESPI-B2 option)
- Resolution bandwidths in line with CISPR 16-1-1
- Detectors in line with CISPR 16-1-1: peak, quasi-peak, average, RMS, CISPR average, RMS average
Spectrum analysis for lab applications
- High-quality spectrum analyzer included (R&S®FSP)
- Extensive measurement functions and evaluation capabilities for general lab applications
Intuitive operation and powerful analysis functions for fast, accurate results
- User-friendly operation as with all modern EMI test receivers from Rohde & Schwarz
- SCAN settings in tabular format
- Simultaneous measurement of up to three traces for parallel evaluation
- Fast, reliable measurements using automatic and interactive test routines
- EMI test receiver and spectrum analyzer in a single box
- Continuous bargraph display and marker functions for precise measurements
- Automatic disturbance voltage measurements using remote-controllable line impedance stabilization networks (LISN) from Rohde & Schwarz
- Predefined transducer factors
- Library of limit lines for commercial standards
- Measurement of the coverage field strength of communications or broadcast networks at very high measurement rates (R&S®ESPI-K50 option)
- Additional channel filters with various bandwidths between 5.6 MHz and 8 MHz matching all terrestrial DVB networks incl. DVB-T2 (R&S®ESPI-K50 option)
Integrates perfectly into the work environment
- Easy expansion or upgrading by means of options
  - Scalar network analysis
  - RF level measurement
  - Modulation measurement
- Extensive documentation and networking capabilities like a PC
- Computer-controlled measurement of disturbances and automated EMI test routines using the R&S®ES-SCAN and R&S®EMC32 EMI measurement software
- Always up-to-date with free firmware updates

Rugged and environmentally friendly, suitable even for field applications

Housing option for outdoor use
- Shock-absorbing corners, carrying handle, carrying bag
AC-independent operation using DC power supply and battery pack (option)
Flash disk option for expanded environmental specifications

Environmentally friendly design

Few materials
Labeling for easy identification of materials
Recyclable housing

Specifications

Frequency range		R&S®ESPI3: 9 kHz to 3 GHz R&S®ESPI7: 9 kHz to 7 GHz
Frequency resolution		0.01 Hz
Frequency accuracy	standard	1 × 10-6
	with R&S®FSP-B4 (OCXO) option	1 x 10-7
External reference frequency		10 MHz
Measurement time	receiver mode/scan (per frequency step)	selectable from 100 µs to 100 s
	analyzer mode/sweep time	selectable from 2.5 ms to 16000 s, zero span from 1 µs to 16000 s
Resolution bandwidth	analyzer mode (–3 dB)	10 Hz to 3 MHz in steps of 1/3/10
	receiver mode (EMI)	200 Hz, 9 kHz, 120 kHz (–6 dB), 1 MHz (impulse bandwidth)
Video bandwidth	analyzer mode	1 Hz to 10 MHz in steps of 1/3/10
Preselection (R&S®ESPI-B2 option)	can be turned off in analyzer mode	11 fixed/continuously tunable filters up to 3 GHz
Preamplifier (R&S®ESPI-B2 option)	can be switched on/off	20 dB gain up to 3 GHz
Level
Max. RF level (CW)	input attenuation ≥ 10 dB	137 dBµV (= 1 W)
Max. pulse energy	input attenuation ≥ 10 dB, 10 µs	1 mWs
Max. pulse voltage	input attenuation ≥ 10 dB, 10 µs	150 V
Third-order intercept (IP3)	without preselection/preamplifier, from 200 MHz to 3 GHz from 3 GHz to 7 GHz	> 7 dBm, typ. 10 dBm > 2 dBm, typ. 5 dBm (only at R&S®ESPI7)
	with preselection/without preamplifier, from 200 MHz to 3 GHz	> 2 dBm, typ. 5 dBm
1 dB compression	f > 200 MHz, input attenuation 0 dB, without preselection/preamplifier	0 dBm, nominal
Total measurement uncertainty	95 % confidence level
	< 3 GHz
	without preselection/preamplifier	0.5 dB
	with preselection/preamplifier	1.5 dB
Displayed average noise level (DANL)	receiver mode, nominal, input attenuation 0 dB, termination 50 Ω
	without preselection/preamplifier, 1 MHz, BW = 9 kHz	< 17 dBμV
	without preselection/preamplifier, 30 MHz to 1 GHz, BW = 120 kHz	< 6 dBμV
	with preselection/preamplifier, 1 MHz, BW = 9 kHz	< 7 dBμV
	with preselection/preamplifier, 30 MHz to 1 GHz, BW = 120 kHz	< - 4 dBμV
Detectors	receiver mode	max./min. peak, quasi-peak, RMS, average, average with meter time constant (CISPR average), RMS average (CISPR RMS)
Number of measurement points	analyzer mode	125 to 8001 (default 501)
	receiver mode	max. 1 million (frequency domain)