Frequency range |
N9040B-508 |
频率范围,3 Hz 至 8.4 GHz
- 3 Hz 至 8.4 GHz
- 3.6 或 8.4 GHz 可选内置前置放大器
- 可作为售后升级选件
|
N9040B-513 |
频率范围,3 Hz 至 13.6 GHz
- 3 Hz 至 13.6 GHz
- 3.6 或 13.6 GHz 可选内置前置放大器
- 可作为售后升级选件
|
N9040B-526 |
频率范围,3 Hz 至 26.5 GHz
- 3 Hz 至 26.5 GHz
- 3.6 或 26.5 GHz 可选内置前置放大器
- 可作为售后升级选件
|
N9040B-550 |
Frequency Range 3 Hz To 50 GHz
- Frequency Range: 3 Hz to 50 GHz
- Available at time of purchase only
|
N9040B-544 |
Frequency Range 3 Hz To 44 GHz
- Frequency Range: 3 Hz to 44 GHz
- Available at time of purchase only
|
|
Connector options |
N9040B-ALV |
辅助对数视频输出
- 输出变化大约 25 mV/dB
- 屏幕上方的输出为 1.6 V
- 输出阻抗为 50 Ω(标称值)
- 可作为售后升级选件
|
N9040B-C35 |
连接器,射频输入,3.5 mm 阳头
- 使用 3.5 mm 连接器代替标配的 N 型连接器
- 可作为售后升级选件
|
N9040B-CRP |
连接器,可编程后面板中频输出
- 中频输出的频率可以在 10 MHz 至 75 MHz 之间以 500 kHz 步进进行调整
- 中频输出带宽为 100 MHz 标称值,中心频率为 70 MHz
- 连接器类型:SMA(阴头),50 Ω 阻抗标称值
- 可作为售后升级选件
|
N9040B-YAV |
Y 轴输出
- 屏幕视频输出与显示视频相同
- 模拟输出连接器的对数视频满标度为 1 V
- 模拟输出的线性视频采用线性标度
- 可作为售后升级选件
|
|
Preamplifier |
N9040B-P08 |
前置放大器,8.4 GHz
- +35 dB 增益
- -172 dBm DANL,配有前置放大器和本底噪声扩展
- 前置放大器能够增强探测低电平信号的能力
- 可作为售后升级选件
|
N9040B-P13 |
前置放大器,13.6 GHz
- +35 dB 增益
- -170 dBm DANL,配有前置放大器和本底噪声扩展
- 前置放大器能够增强探测低电平信号的能力
- 可作为售后升级选件
|
N9040B-P26 |
前置放大器,26.5 GHz
- +35 dB 增益
- -162 dBm DANL,配有前置放大器和本底噪声扩展
- 前置放大器能够增强探测低电平信号的能力
- 可作为售后升级选件
|
N9040B-P44 |
Preamplifier, 44 GHz
- +40 dB gain up to 44 GHz for enhanced sensitivity to low signal levels
- Up to –172 dBm DANL with preamp and noise floor extension
- Available as a post-purchase upgrade
|
N9040B-P50 |
Preamplifier, 50 GHz
- +40 dB gain up to 50 GHz for enhanced sensitivity to low signal levels
- Up to –172 dBm DANL with preamp and noise floor extension
- Available as a post-purchase upgrade
|
|
Bandwidth |
N9040B-B2X |
Analysis Bandwidth, 255 MHz
- Supports real-time spectrum analyzer
- Capture memory: 2 GB
- ADC resolution: 14 bits
- Available as a post-purchase upgrade
|
N9040B-B5X |
Analysis Bandwidth, 510 MHz
- Supports real-time spectrum analyzer
- Capture memory: 2 GB
- ADC resolution: 14 bits
- Available as a post-purchase upgrade
|
N9040B-B25 |
分析带宽,25 MHz
- 捕获存储器:2 GB
- ADC 分辨率:12 位元
- 可作为售后升级选件
|
N9040B-B40 |
Analysis Bandwidth, 40 MHz
- Capture memory: 2 GB
- ADC resolution: 12 bits
- Available as a post-purchase upgrade
|
N9040B-H1G |
1 GHz 分析带宽
- 分析带宽扩展至 1 GHz
- 频率范围:3 Hz 至 50 GHz
- ADC 分辨率:12 位
- 包括 255 MHz(B2X)能力
- 只在购买时提供
|
|
Performance options |
N9040B-EA3 |
电子衰减器,3.6 GHz
- 步长:1 dB
- 范围:0 至 24 dB
- 包括机械衰减的完整范围:94 dB
- 可作为售后升级选件
|
N9040B-EMC |
基本预兼容性 EMI
- 完全符合 CISPR 16-1-1(2010)标准的检波器
- 高达 18 GHz 的 CISPR 频段预置
- 使用 3 台检波器在游标处测量
- 用于信号识别的调谐和侦听
- 可作为售后升级选件
|
N9040B-FP2 |
快速功率,带宽高达 40 MHz
- 单次采集带宽:40 MHz
- 启用硬件加速快速功率测量
- 为功率测量而优化
- 可作为售后升级选件
|
N9040B-RTS |
Real-Time Wideband I/Q Data Streaming
- Real-Time Wideband I/Q Data Streaming
- May be combined with X-COM IQC5255B for turnkey 255 MHz record and playback solution
- 16-bit I + jQ digital data at up to 300 MSamples/S, continuously variable based on span setting
- Available as a post-purchase upgrade
|
N9040B-FT1 |
Frequency Mask Trigger, Basic Detection License
- Capture elusive, intermittent signals for further analysis
- > 15 µs signal duration
- Seamless operation in 89600 VSA Software and N9067C pulse application
- Available as a post-purchase upgrade
|
N9040B-FT2 |
Frequency Mask Trigger, Optimum Detection License
- Capture elusive, intermittent signals for further analysis
- > 3.6 µs signal duration
- Seamless operation in 89600 VSA Software and N9067C pulse application
- Available as a post-purchase upgrade
|
N9040B-DUA |
Duplex IF RTSA
- Enables control of 2 x 255MHz DIF for optimized frequency and time domain analysis in RTSA mode at the same center frequency
- Able to view RT spectrum, Power vs Time, Powergram, and Spectrogram all at the same time with independent time domain and frequency domain spans
- Requires option B5X and RT1 or RT2
- Available as a post-purchase upgrade
|
N9040B-TDS |
Time Domain Scan
- ~90% overlap in the time domain for amplitude accuracy and fast transient capture
- CISPR-compliant amplitude accuracy and weighted detector performance
- Monitor spectrum and amplitude probability distribution
- Available as a post-purchase upgrade
|
|
Calibration options |
N9040B-A6J |
ANSI Z540 一致性校准
- 从工厂装运并经过 ANSI Z540 校准
- 提供测量结果、不确定度数据和技术指标
- 确定合格/不合格状态时不包含不确定度数据
- 只在购买时提供
|
N9040B-UK6 |
包含测试数据的商业校准证书
- 由是德科技工厂实施的商业校准
- 校准证书印刷本
- 关于从 Infoline 下载测试数据报告的指导
- 只在购买时提供
|
|
|
Real time signal analysis |
N9040B-RT1 |
Real-time analysis, basic detection, 255 MHz with B2X/H1G, 500 MHz with B5X, license |
N9040B-RT2 |
Real-time analysis, optimum detection, 255 MHz with B2X/H1G, 500 MHz with B5X, license |
|
Security features |
N9040B-SF1 |
安全特性,不包括启动程序
- 许可证密钥激活,提供额外的安全功能特性
- 需要 A.12.06 版本或更高版本的软件
- 可作为售后升级选件
|
N9040B-SF2 |
安全特性,禁止保存结果
- 许可证密钥激活,提供额外的安全功能特性
- 需要 A.14.00 版本或更高版本的软件
- 可作为售后升级选件
|
N9040B-SSD |
额外的可拆卸固态硬盘
- 串行 ATA(SATA)数据接口的可拆卸固态硬盘
- 坚固的可拆卸托架,少可插入 1500 次
- 操作系统、软件和校准文件镜像
- 可作为售后升级选件
|
|
|
N9040B-ESC |
External source control |
|
N9040B-DVR |
USB DVD-ROM/CD-R/RW 驱动器
- 连接到前面板或后面板上的 USB 端口
- 从 Microsoft® Windows 用户界面访问 DVD 或 CD 介质
- 可作为售后升级选件
|
|
N9040B-KB2 |
USB keyboard Smaller keyboard |
|
N9040B-MLP |
50 至 75 Ω 小损耗衰减器(N 型至 BNC)
- 连接器:50 Ω N 型(阳头)至 75 Ω BNC(阴头)连接器
- 插入损耗:5.7 dB
- 输入/输出回波损耗:20 dB
- 大输入功率:1 W
- 平坦度:+/- 2 dB
- 可作为售后升级选件
|
|
N9040B-MSE |
Mouse, USB |
|
N9040B-2CM |
Rack mount flange kit 265.9mm H (6U) - two flange brackets, two standard rails, DARK COLORS |
|
N9040B-2CP |
Rack mount flange and handle kit 265.9mm H (6U) - two brackets, handles, rails, DARK COLORS |
|
Application software |
89601B |
- 89600 VSA 软件
- 蜂窝、无线连通性、航空航天、国防、通用
- 同时查看多个时域、频域和调制域视图
- 先进故障诊断工具包括触发、记录和回放
- 支持超过 45 种是德科技测量平台
|
N6171A |
MATLAB 软件
- 创建任意波形
- 定制测量/数据分析例程、仪器应用程序/测试系统
- 自动化测量以及信号与报告生成
- 可通过购买兼容仪器从是德科技直接获
|
N9063C |
配有多点触控用户界面、适用于 UXA 的模拟解调测量应用软件
- 多点触控用户界面
- 对 AM、FM、PM 和 FM 立体声信号进行一键式测量
- 显示调制参数:AM 深度、FM/PM 偏差、THD、SINAD、FM 立体声
- 可作为售后升级选件
|
N9067C |
Pulse Measurement Application, Multi-touch UI
- Automatically synchronize to pulsed signals up to 50 GHz and bandwidth of 510 MHz
- View key pulse signal modulation performance indicators and pulses in a time, frequency and phase-domains
- Runs inside X-Series signal analyzers with multi-touch UI
查看详情
|
N9068C |
Phase Noise Measurement Application, Multi-touch UI
- 1-touch measurements for analyzing phase noise in frequency domain (log plot) & time domain (spot frequency)
查看详情
|
N9069C |
噪声系数测量应用软件,多点触控用户界面
- 噪声系数/增益测量
- 一键式测量:噪声系数、增益、Y 因数、有效温度和热态/冷态功率密度
- 支持 SNS 346 系列噪声源和 U7227x 系列 USB 前置放大器
- 可作为售后升级选件
查看详情
|
N9071C |
GSM / EDGE / Evo Measurement Application, Multi-Touch UI
- GSM, EDGE and EDGE Evolution including VAMOS1 and Multi-Carrier BTS (MCBTS) per 3GPP GERAN standard
- Base station and mobile station RF transmitter measurements; analog baseband measurements One-button measurements with pass/fail per the standard
|
N9073C |
W-CDMA/HSPA/HSPA+ Measurement Application, Multi-touch UI
- W-CDMA/HSPA/HSPA+ per 3GPP Release 99 to 8
- Includes uplink/downlink RF transmitter measurements
- Transmit analog baseband measurements with BBIQ hardware
- 1-touch measurements with pass/fail per the standard
|
N9077C |
WLAN 802.11a/b/g/j/p/n/ac/af/ah/ax Measurement Application, Multi-Touch UI
- Compliant to 802.11a/b/g/j/p/n, 802.11ac, 802.11af, 802.11ah, 802.11ax IEEE series standards for WLAN design/manufacturing test
- Manual settings for 802.11a-turbo mode
- One-button pass/fail measurements per standard
|
N9080C |
LTE/LTE-Advanced FDD 测量应用软件,多点触控用户界面
- 按照 3GPP 第 8 版到第 13 版标准进行 LTE 和 LTE-Advanced FDD 信号分析
- 使用单一选件提供上行链路和下行链路测量
- 多达 5 个子载波的载波聚合
- 在具有多点触控用户界面的 UXA、PXA、MXA、EXA 和 CXA X 系列信号分析仪中运行
|
N9081C |
Bluetooth Measurement Application, Multi-Touch UI
- Compliant with Bluetooth® Core Specification Version 2.1+ EDR & Low Energy (BR/EDR/LE 4.0/4.2/5.0)
- One-button measurements with pass/fail per the standard
|
N9082C |
LTE / LTE-Advanced TDD Measurement Application, Multi-touch UI
- LTE and LTE-Advanced TDD per 3GPP Release 8 to 12
- Includes Uplink and downlink measurements in a single option
- Carrier aggregation up to five component carriers
- Runs inside UXA, PXA, MXA, EXA and CXA X-Series signal analyzers with multi-touch UI
|
N9084C |
Short Range Communications Measurement Application, Multi-Touch UI
- Compliant with ZigBee (IEEE 802.15.4) and Z-Wave RF transmitter tests
- One-button measurements with pass/fail per the standard
- Runs inside UXA, PXA, MXA, EXA, and CXA X-Series signal analyzers with multi-touch UI
|
N6141C |
EMI Measurement Application, Multi-Touch UI
- Built-in CISPR and MIL-STD compliant bandwidths, detectors and band presets
- Automated testing to regulatory Limit Lines with user-selected margins
- Amplitude correction for antennas, LISNs, cables, preamps
|
N9054C |
VMA 矢量调制分析应用软件,多点触控用户界面
- 用于猝发分析的 FFT 频谱分析和时域分析工具
- 通用模拟和数字调制分析(可选)
- 在具有多点触控用户界面的 UXA、PXA、MXA、EXA 和 CXA X 系列信号分析仪中运行
|
N9061C |
Remote Language Compatibility Application, Multi-Touch UI
- Emulate HP/Keysight 856xE/EC or 8566/8568 spectrum analyzers in remotely controlled, ATE systems
- Migrate 856xE/EC-based or 8566/8568-based ATE systems to seamlessly include a modern signal analyzer
|
|
Additional documentation |
N9040B-AB1 |
Korean localization, user interface and getting started guide |
N9040B-AB2 |
Chinese localization, user interface and getting started guide |
N9040B-ABF |
French localization, user interface and getting started guide |
N9040B-ABJ |
Japanese localization, user interface and getting started guide |
N9040B-AKT |
Russian localization, user interface and getting started guide |
N9040B-ABE |
Spanish localization, user interface and getting started guide |
|
N9040B-RTR |
Real-time Spectrum Recorder and Analyzer Application Example, License |